Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 11-09-2011, 06:31 PM   #1
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Default N/A 3 valve 1/4 mile time

anyone know what the best 1/4 mile time for a N/A 3 valve is?

ghiadup is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2011, 07:09 PM   #2
xt3valve
FF.Com.Au Hardcore
 
xt3valve's Avatar
 
Join Date: Nov 2006
Posts: 882
Default Re: N/A 3 valve 1/4 mile time

Think it was a 12.3 or something. Think it was Craig from ACE that recorded that.

I recall the car having swaped out suspention optimised for drag racing purposes, light weight rims with slicks and front runners, 3500 high stall, 4.11 diff gear, race underdrives, exhaust ect and a good tune. Car was making around 235rwkw.

Someone correct me if I am wrong.
__________________
2003 Ba xt Falcon 3v 5.4l
Engine: Eaton M122h supercharged 8psi, water to air intercooled, FRPP Hot Rod cams, 85lb/hr injectors, custom fuel rails, Shelby GT500 carbon fibre intake, maxed out factory 3v heads, fuel cell
Drive shaft: Veems modified 1310 series components, 3" X 0.65" tube, solid cross universal joints and heavy duty centre bearing. Weight saving of 2.2kg and an increase in critical speed of 2,000RPM.
Gearbox: Fully rebuilt BTR 4sp, Chryogenicaly treated, high stall
490rwhp E85
xt3valve is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2011, 07:25 PM   #3
Powdered Toast Man
Professional Mouse Jockey
 
Powdered Toast Man's Avatar
 
Join Date: Nov 2005
Location: SE Vic
Posts: 3,185
Default Re: N/A 3 valve 1/4 mile time

I thought Craigs 3V was a manual? Or did he have a couple?
__________________
Isuzu MUX for towing horses - currently no Fords in the stable

Time flies like an arrow; fruit flies like a banana. Groucho Marx
Powdered Toast Man is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2011, 10:11 PM   #4
xt3valve
FF.Com.Au Hardcore
 
xt3valve's Avatar
 
Join Date: Nov 2006
Posts: 882
Default Re: N/A 3 valve 1/4 mile time

Could have been PTM.

Im just remembering what I read a long time ago. Think it was a goldy coloured car. I know that it was an auto that did a stout time. As he mentioned that to get those times you needed the mods that I listed above and I took note of what he had done.

Again I could very well be wrong. And yes I think his blue 3v was the fastest N/A manual 3v I think.
__________________
2003 Ba xt Falcon 3v 5.4l
Engine: Eaton M122h supercharged 8psi, water to air intercooled, FRPP Hot Rod cams, 85lb/hr injectors, custom fuel rails, Shelby GT500 carbon fibre intake, maxed out factory 3v heads, fuel cell
Drive shaft: Veems modified 1310 series components, 3" X 0.65" tube, solid cross universal joints and heavy duty centre bearing. Weight saving of 2.2kg and an increase in critical speed of 2,000RPM.
Gearbox: Fully rebuilt BTR 4sp, Chryogenicaly treated, high stall
490rwhp E85
xt3valve is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2011, 11:40 PM   #5
XRCIST
FF.Com.Au Hardcore
 
XRCIST's Avatar
 
Join Date: Feb 2005
Location: Melbourne
Posts: 2,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by xt3valve
Could have been PTM.

Im just remembering what I read a long time ago. Think it was a goldy coloured car. I know that it was an auto that did a stout time. As he mentioned that to get those times you needed the mods that I listed above and I took note of what he had done.

Again I could very well be wrong. And yes I think his blue 3v was the fastest N/A manual 3v I think.
I think the Gold one was a Bluepower tuned car, im pretty sure it was cammed too. Ran in the mid 12s.
XRCIST is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2011, 06:07 PM   #6
gavforce8
Regular Member
 
Join Date: Jun 2010
Posts: 115
Default Re: N/A 3 valve 1/4 mile time

anything closer to street trim??
gavforce8 is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2011, 06:21 PM   #7
Road Games
Guest
 
Road Games's Avatar
 
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
Technical Contributor: For members who share their technical expertise. - Issue reason: Replacement. 
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by gavforce8
anything closer to street trim??
Here ya go...

http://www.fordforums.com.au/showthr...1222789&page=2
Road Games is offline   Reply With Quote Multi-Quote with this Post
Old 13-09-2011, 02:57 PM   #8
gavforce8
Regular Member
 
Join Date: Jun 2010
Posts: 115
Default Re: N/A 3 valve 1/4 mile time

Ghiadup has 3 valve that ran a 13.2 last Wednesday, high stall going in today, update to the tune Wednesday, some semi slicks to be found and hopefully a test on Wednesday 21/09/11
gavforce8 is offline   Reply With Quote Multi-Quote with this Post
Old 13-09-2011, 03:44 PM   #9
Bluepower
KenneBell Australia
 
Bluepower's Avatar
 
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
Default Re: N/A 3 valve 1/4 mile time

Craig (rip) had all 3v records bar forced induction records, probably only because he didn't try them.

AND they are years old too, those records.

Craig, I still miss you mate and it kills me everytime I think about it. The world is a much duller place without you. Took me 3 years to get back into the seat, and its just not the same.

God bless mate. We'll meet again one day.

Sorry for off topic.
__________________



Bluepower Racing Developments

Proud Australian Distributors of Kenne Bell superchargers
The Quickest, The Fastest, The Baddest Boss Blower of all.

www.bluepower.com.au



Bluepower is offline   Reply With Quote Multi-Quote with this Post
Old 13-09-2011, 04:48 PM   #10
gavforce8
Regular Member
 
Join Date: Jun 2010
Posts: 115
Default Re: N/A 3 valve 1/4 mile time

Bluepower (not sure who at Bluepower) - sorry I am not a regular user of the forums so not up to speed but take it you lost a good friend, mate etc...sorry to hear.

ghiadup & myself are running Bluepower CAI - awesome CAI, straight up knock 4/10ths off my Force 8.

ghiadup is only just getting his Ghia up to speed, so a bit behind times, thread created to see if on target, by the sounds of it getting there
gavforce8 is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 10:10 AM   #11
Theo@BluePower
Bluepower
Donating Member1
 
Theo@BluePower's Avatar
 
Join Date: Jul 2008
Posts: 1,266
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by gavforce8
Bluepower (not sure who at Bluepower) - sorry I am not a regular user of the forums so not up to speed but take it you lost a good friend, mate etc...sorry to hear.

ghiadup & myself are running Bluepower CAI - awesome CAI, straight up knock 4/10ths off my Force 8.

ghiadup is only just getting his Ghia up to speed, so a bit behind times, thread created to see if on target, by the sounds of it getting there

He is on the money mate, for sure!!

Craig was a mate of mine, we raced cars together, everytime i see anything written about a 3v, it tugs at the heart strings
__________________
Blue Power Racing Developments
Bluepower website
47 Cooper Street Campbellfield Vic
03 9305 3000

Theo@BluePower is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 10:10 AM   #12
Theo@BluePower
Bluepower
Donating Member1
 
Theo@BluePower's Avatar
 
Join Date: Jul 2008
Posts: 1,266
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by Theo@BluePower
He is on the money mate, for sure!!

Craig was a mate of mine, we raced cars together, everytime i see anything written about a 3v, it tugs at the heart strings

BTW Chris here, just using Theo's login.......
__________________
Blue Power Racing Developments
Bluepower website
47 Cooper Street Campbellfield Vic
03 9305 3000

Theo@BluePower is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 04:45 PM   #13
XRDeeze
UTRIED
 
XRDeeze's Avatar
 
Join Date: Aug 2011
Location: Townsville
Posts: 602
Default Re: N/A 3 valve 1/4 mile time

R.I.P

I did 14.9's at the Townsville drag , and only mod ive done to this is a Lukey Catback, think a good tune up , would get that under 14?
__________________
BA XR6 03

Townsville Drag 1/10/11 PB: 15.34 @ 91.09 mph
XRDeeze is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 05:05 PM   #14
Road Games
Guest
 
Road Games's Avatar
 
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
Technical Contributor: For members who share their technical expertise. - Issue reason: Replacement. 
Default Re: N/A 3 valve 1/4 mile time

Here are a couple of threads of interest ...

http://www.fordforums.com.au/showthread.php?t=180

http://www.fordforums.com.au/showthread.php?t=56679

http://www.fordforums.com.au/showthread.php?t=50394
Road Games is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 06:11 PM   #15
gavforce8
Regular Member
 
Join Date: Jun 2010
Posts: 115
Default Re: N/A 3 valve 1/4 mile time

Thanks XR6, goo info. any idea where I find the mods / etc to the taxi??

For everyones info, I am ghiadups Dad, I actually started the thread, didn't realise James had signed in on my laptop until after I posted. Also the BA F/mont 3v is my old car, I am loving watching my son get it going.

Hi stall went in yesterday, but dropped a spark plug or coilover on number 5, so can't get the updated tune.

Any 3v people interested in specs / mods let me know, happy to share.

cheers
gavforce8 is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2011, 07:30 PM   #16
BFXT54L
FF.Com.Au Hardcore
 
BFXT54L's Avatar
 
Join Date: Mar 2005
Location: Sydney
Posts: 525
Default Re: N/A 3 valve 1/4 mile time

Is there a build thread on this car?
__________________
2006 BF MK2 XT In Vixen
V8 5.4 LITRE 3V , ZF Auto,LSD. PB 13.45 @ 104 MPH With a 60 Foot of 2.036

https://www.youtube.com/watch?v=gEzamQojCm8

I use and Recommend Sydney Dragway
http://www.sydneydragway.com.au/
BFXT54L is offline   Reply With Quote Multi-Quote with this Post
Old 15-09-2011, 01:50 PM   #17
gavforce8
Regular Member
 
Join Date: Jun 2010
Posts: 115
Default Re: N/A 3 valve 1/4 mile time

no build thread sorry mate, just bits & pieces here and there, pics in the show & shine and some in the Boss powered section (when cams fitted).

new set of plugs in last night, without breaking any!! so back to tuner tonite for tweak Friday, torque settings not quite right yet, but could hear the difference already, haven't been in the car yet?

Maybe after Wednesday 21 /09/11 nites run I can convince ghiadup to put up a build thread.
gavforce8 is offline   Reply With Quote Multi-Quote with this Post
Old 15-09-2011, 02:27 PM   #18
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Default Re: N/A 3 valve 1/4 mile time

cheers for the info everyone its pretty hard when your trying to compare your car to mates cars which are commodores, dont see many 3v's at all good to see that its on target for some good times in the future

like my old man said its getting tuned on friday maybe ready for drags wenesday if i can find some semi slicks bit short on the coin atm so might have to wait abit or even just take it down on streeters and see how we go

i might have to put a build thread up after get in back on friday

James
ghiadup is offline   Reply With Quote Multi-Quote with this Post
Old 18-09-2011, 02:01 PM   #19
XRDeeze
UTRIED
 
XRDeeze's Avatar
 
Join Date: Aug 2011
Location: Townsville
Posts: 602
Default Re: N/A 3 valve 1/4 mile time

*15.9's sry I lie , went to the Drags last night and on the sheet it said 14.71 @ 97.82 mph (I wish) but I think the women was lookin at the wrong car/number lol
__________________
BA XR6 03

Townsville Drag 1/10/11 PB: 15.34 @ 91.09 mph
XRDeeze is offline   Reply With Quote Multi-Quote with this Post
Old 12-04-2012, 06:38 PM   #20
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Default Re: N/A 3 valve 1/4 mile time

12.984 last night at WAW with the highstall was playing up a bit when i was launching should be able to get better time with good launch
ghiadup is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2012, 07:03 PM   #21
EFFalcon
Last warning
 
EFFalcon's Avatar
 
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,194
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by ghiadup
12.984 last night at WAW with the highstall was playing up a bit when i was launching should be able to get better time with good launch
You still running the factory auto?
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating
EL GT - Supercharged
NASCAR - 83 Thunderbird , Bagged
DAILY - BA Fairlane Ghia, Boss 260 Turbo
OFFROADER - Ford Explorer
EFFalcon is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2012, 10:53 AM   #22
Mr. CVE
If it aint Blown it Sucks
 
Mr. CVE's Avatar
 
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
Default Re: N/A 3 valve 1/4 mile time

Thats a good time.
Wish I still had my old BA, was a good car !
__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph
@235 rwkw !!
Now turbo 11.77 @114 mph
320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:
Now for sale
http://www.fordforums.com.au/showthread.php?t=11296772

Thanks to Snort Performance, Headsex and CVE
Street car DeTomaso Pantera
Drag car 1995 Mustang, Haleys Comet ( It's back !)
Power by CVE
Melbourne's first SNIPER Tuner :
Now tuning E series
Mr. CVE is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2012, 07:32 PM   #23
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Thumbs down Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by Mr. CVE
Thats a good time.
Wish I still had my old BA, was a good car !
. Might have to change your signature to second fastest n/a ghia in australia
ghiadup is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2012, 08:23 PM   #24
Mr. CVE
If it aint Blown it Sucks
 
Mr. CVE's Avatar
 
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
Default Re: N/A 3 valve 1/4 mile time

True, mine was on the 20" wheels and std converter, full street trim, was while I was in Sydney on holiday !
__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph
@235 rwkw !!
Now turbo 11.77 @114 mph
320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:
Now for sale
http://www.fordforums.com.au/showthread.php?t=11296772

Thanks to Snort Performance, Headsex and CVE
Street car DeTomaso Pantera
Drag car 1995 Mustang, Haleys Comet ( It's back !)
Power by CVE
Melbourne's first SNIPER Tuner :
Now tuning E series
Mr. CVE is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2012, 09:03 PM   #25
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Default Re: N/A 3 valve 1/4 mile time

Quote:
Originally Posted by Mr. CVE
True, mine was on the 20" wheels and std converter, full street trim, was while I was in Sydney on holiday !
yeh i did a 13.2 Pass with standard converter and on 20s and street trim
ghiadup is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2012, 09:26 PM   #26
Mr. CVE
If it aint Blown it Sucks
 
Mr. CVE's Avatar
 
Join Date: Dec 2004
Location: S E Melbourne
Posts: 2,115
Default Re: N/A 3 valve 1/4 mile time

Good to see someone catch up. I got bored with it and turboed it.
That was many years ago.
On to bigger and faster things now.

Have fun with it, they can go real well when pushed.
__________________
Australia's fastest 3V n/a Ghia 13.52 @ 102 mph
@235 rwkw !!
Now turbo 11.77 @114 mph
320 rwkw, 810 nm torque, 280rwkw @3000 rpm !! :thebirds:
Now for sale
http://www.fordforums.com.au/showthread.php?t=11296772

Thanks to Snort Performance, Headsex and CVE
Street car DeTomaso Pantera
Drag car 1995 Mustang, Haleys Comet ( It's back !)
Power by CVE
Melbourne's first SNIPER Tuner :
Now tuning E series
Mr. CVE is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2012, 10:03 PM   #27
ghiadup
Regular Member
 
Join Date: Jul 2011
Posts: 61
Default Re: N/A 3 valve 1/4 mile time

yeh mate still factory auto box with better solenoids for firm shifts

decided to spend some more money on the rig ford racing cnc heads apprantley make good 50 + rwhp when used with thr frpp hot rod cams that i got
ghiadup is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL