Wheelie Bar Launch

[frog250]

http://www.hipervids.com/videos/caprilaunch.wmv

I havent seen this before, check out the drivers head looking out the side window in the slow-mo replay.

Trick & Mansweto at their best yet again.

[Ghiadude]

whats under the bonnet???


god damn thats a hard launch!!

[XYGTHO]

Hell yeah. Those guys build insane fords.

[frog250]

It runs a 604cu. I have seen this car make over 1000hp at the wheels at summernats this year. Also runs consistent 7 sec passes at over 170mph.

Very high quality car.

[Ghiadude]

sheeeeeeeiiiiiiiiiiiitttttt!!!!! I just had a look at their site. Awesome!!

[Falcon Coupe]

Awsome, air under back wheels is a new trick.

[BJ]

I like the way he doesnt back off.

[SpoolMan]

awesome looks like WSID.

moved to drag forum.

[Rod]

[QUOTE=SpoolMan]awesome looks like WSID.
QUOTE]

it was Sydney

they Had just rebuilt the 600Ci engine with a new Sheetmetal manifold that gave them an extra 100 HP & 30 ft Lbs for a total of 1260 HP & 875 ft Lbs

they had a problem earlier in the day with the floats being uncoverd in the wheelstand

once they raised the float level the engine didnt stay at 6200 RPM out of the hole for 2 seconds like it had done previously instead it climbed rapidly to 7500 RPM whilist still moveing upwards

the extra acceleration cause the wheelie bars to bend further up & bottom out on the rear of the car which actually cause them to bend & not hold the car down at all, like it has done for 3 years now.

When it left the line they knew that something was wrong in the wheelie bar department due to only seeing blue sky for way too long, but knew if he got out of the throttle the car would come down & totally smash everything underneith, so he kept his foot on the throttle until it came back down totally. After the car settled he removed his foot only to realise that the throttle was actually stuck on full. he looked at the tacho & it was somewhere around 8600 & new the rev limited was set to 8700, so as soon as the limiter took hold of the motor he selected netural & hit the kill switch to end this wild but exciting ride.

[STK-XR8]

daaaaaammmmmmmmmmmm,
how much $ for a ride ,beats all amusement park rides...

lucky the wheelie bars didnt snap would'v ended on his roof ..

[UNRULY]

I was there and took this photo;

[SpoolMan]

[QUOTE=Rod]

Originally Posted by SpoolMan

awesome looks like WSID.
QUOTE]

it was Sydney

they Had just rebuilt the 600Ci engine with a new Sheetmetal manifold that gave them an extra 100 HP & 30 ft Lbs for a total of 1260 HP & 875 ft Lbs

they had a problem earlier in the day with the floats being uncoverd in the wheelstand

once they raised the float level the engine didnt stay at 6200 RPM out of the hole for 2 seconds like it had done previously instead it climbed rapidly to 7500 RPM whilist still moveing upwards

the extra acceleration cause the wheelie bars to bend further up & bottom out on the rear of the car which actually cause them to bend & not hold the car down at all, like it has done for 3 years now.

When it left the line they knew that something was wrong in the wheelie bar department due to only seeing blue sky for way too long, but knew if he got out of the throttle the car would come down & totally smash everything underneith, so he kept his foot on the throttle until it came back down totally. After the car settled he removed his foot only to realise that the throttle was actually stuck on full. he looked at the tacho & it was somewhere around 8600 & new the rev limited was set to 8700, so as soon as the limiter took hold of the motor he selected netural & hit the kill switch to end this wild but exciting ride.

Rod who let you in here...lol... _2:

Originally Posted by UNRULY

I was there and took this photo;

That's a great picture, I reckon the owners of the car would love that pic.

[UNRULY]

I have spoken to Tristan Triccas already. He has shown interest in it.

[Fair302]

That is mad...

How do we get a copy of that amazing pic?

[UNRULY]

You can pay me $50 and I will post you a CD with the series of shots I took of the wheelstand.

email markwear@bigpond.com

[Fair302]

Thanks for the offer but...

[XRDRIFT]

HOLY MC SHYT, thats awesome, bet he was shytin himself...maybe not, he's probably used to it.

That would have been some ride

[Tapd]

That thing is awesome, gotta be one of the toughest fords in australia. What a crazy lauch.

If you look carefully there is one photographer who could have captured the moment the capri was in the air. Look for his pics in a major mag i reckon!!!

[Extreme Ed]

Hi guys,
In Issue 22 of Extreme (on sale Oct 25th), we uncover exactly what is inside that awesome big block powering the Trick & Mansweto Capri. We have their permission to print everything about the engine including cam specs etc. We also plan on a special centre poster showing a heap of different angles of the wheelstand. It's one that shouldn't be missed.

Cheers,

Paul Beck
Publishing Editor
Extreme Street Magazine - Australia's Toughest Car Magazine!
www.extrememagazine.com.au

[2rismo]

There's some great pics floating around from this. Anyone got any more?

[Quadcams]

Was talking to the guys from Trick & Mansweto last night about that pass at WSID, an awsome pair of fellas flying the Ford flag.

[SpoolMan]

Doing some mining, thought this was worth bringing back for those that haven't seen it, great video and picture..

[homegrown]

Did anyone else get a virus clicking on this link. Just doing some back tracking. Seeing what I was doing yesterday.
Thanks.

[DaveD]

Originally Posted by homegrown

Did anyone else get a virus clicking on this link. Just doing some back tracking. Seeing what I was doing yesterday.
Thanks.

No virus from that link here.